Outdoor marble fountains add beautiful landscapes to the courtyard, bring peaceful water sounds, and enhance the quality of the living environment. However, with the arrival of winter, low temperatures may cause damage to the fountain and affect its service life. Therefore, winter maintenance is particularly important, and timely measures can effectively prevent fountains from freezing and other potential damage.
1. Drain the water
Before the arrival of winter, it is the first step to completely empty the water in the fountain. Here are the detailed steps:
Turn off the fountain pump: Make sure the fountain pump is turned off to prevent water from flowing.
Drain: Find the drain of the fountain, open the drain valve, and ensure that the water can be discharged smoothly.
Use a pump: If the fountain is large, a pump can be used to speed up the drainage process.
Check for residual water: After draining, check whether there is any residual water at the bottom of the fountain, and wipe it clean with a sponge or towel if necessary.
Emptying the water source is a key step to prevent freezing. Residual water will freeze at low temperatures, which may cause damage to the structure and pump of the fountain.
2. Use antifreeze
Antifreeze is an effective protective measure that can lower the freezing point of water and prevent freezing. The usage is as follows:
Choose a special antifreeze: Be sure to choose an antifreeze designed specifically for fountains to ensure its safety and effectiveness.
Add antifreeze: After emptying the water source, you can add antifreeze to the fountain according to the proportion in the instructions to ensure even distribution.
Choosing a special antifreeze can not only prevent ice formation but also protect the internal materials of the fountain and extend its service life.
3. Protection measures
To further protect the fountain, the following measures cannot be ignored:
Use insulation materials: The fountain pump and pipes can be wrapped with insulation materials to reduce direct contact with cold air. Common insulation materials include foam plastics and insulation blankets.
Use a protective cover: Cover the fountain with a protective cover to avoid the direct impact of snow and ice. This not only prevents ice formation but also protects the fountain from wind and rain.
4. Clean the fountain
Keeping the fountain clean is an important part of extending its service life. The cleaning steps are as follows:
Clean the inside: Use a soft brush and mild detergent to gently scrub the inside of the fountain to remove dirt and algae.
Clean the filter: Check and clean the filter regularly to ensure that it is unobstructed.
Keeping the fountain clean can effectively prevent water quality deterioration and reduce the risk of freezing.
5. Removable parts
Before winter comes, removing the movable parts of the fountain can effectively prevent damage. Here are some suggestions:
Removable parts: Removable parts such as water pumps and lamps should be removed carefully.
Storage precautions: Keep the removed parts in a cool and dry place indoors to avoid damage caused by moisture and low temperatures.
6. Regular inspection and maintenance
During the winter, it is necessary to regularly check the status of the fountain:
Regularly check whether the fountain is covered with accumulated debris such as snow. On the one hand, it can reduce the load-bearing capacity of the fountain, and on the other hand, it is convenient for the direct use of the fountain in spring.
Conclusion
It is essential to maintain outdoor marble fountains in winter, and taking appropriate measures can effectively prevent freezing and damage. By draining water, using antifreeze, protective measures, cleaning fountains, removing movable parts, and regular inspections, you can ensure the safety and beauty of the fountain in winter. Take action now and give your fountain a safe winter!
